You won’t like the dirty and muddy tire of your bike. Here you get a clear idea or information that would help if you wanted to clean your bike tire. But, before cleaning up the tire, you have to know how to clean bike tires, and the necessary equipment to clean bike tires should be kept.

When learning how to clean bike tires, it’s essential to maintain them like you would with top rated electric bikes, ensuring they stay in peak condition for a smoother ride.

Tire cleaning requires warm water and cleaning reagents. But, if it is your first time cleaning a tire, it will be better to use normal water. Because as a beginner cleaner guy, you may not figure out how much warm water is needed to clean.

It is helpful to remove most of the dirt by hitting the tire with water speed. There are also many tricks to clean tires easily which are described in the procedure below.

Before following the procedure of cleaning, the equipment of cleaning must be assembled and kept to yourself. The necessary cleaning equipment is-

• Water
• A water pipe
• A cleaning reagent / Cleaner
• A big brush
• A toothbrush
• Rags for wiping
• A hair dryer (optional)

The procedure for how to clean bike tires

Step 1

Prop your bike on a stand. If you have nothing to prop your bike, you need to turn your bike upside down and then soak your bike tires for a few minutes if you want to clean your tire easily. Because, when the tire gets wet for a while, the dried mud on the tire will soften and it is easy to clean by brushing.

Step 2

Wash the tire with a speedy flow of water. Most of the mud washes away for the speed of water flow (Pressing the mouth of the water outlet of the pipe with your fingers will increase the speed of water coming out). By doing this, your bike tire cleaning process will be easier.

Step 3

After completing step 2, you must need the tire cleaner. Spray the tire cleaner to every point of the tire, and wait for a while.

Now it’s time to use the tire cleaner or make it at home. If you are confused about choosing a cleaner, I’ll suggest Adam’s Polishes Tire Cleaner, which is the best cleaner according to the expert.

If you want to make it at home, you can make it by using baking soda and vinegar (The cleaner-making procedure is described later).

Step 4

After spraying the tire cleaner, you have to brush the tire with a large soft brush applying moderate pressure. By brushing, there will create foam and the dirt will off from the tire.

But sometimes there is some dirt deep in the groove of the tire which cannot be cleaned with a big brush. It is easier to brush deep into the grooves with a small toothbrush. So with a small toothbrush, brush deep into the groove and clean it.

Step 5

After brushing the tire, wash it with water. If you want, you can wash it by speed flow of water, but this is not a must-do.

Step 6

Your bike tire cleaning process is complete. Now, if you want to dry your wet tire, take a rag and wipe the tire. You can do the drying process in another way, if you put your bike in the sun, the heat will dry it out. However, if it is night, you can use a hair dryer to dry the tire.

keep in mind while cleaning tires

Place

Choose such a place to complete your cleaning procedure, which is appropriate to drain the water and lather. Be sure about the place where water can’t accumulate.

Valve

It would help if you covered the tire valve with a dust cap. Due to the dust cap, the valve will not fill up with mud. But, if you don’t have a dust cap, you must check the tire valve for dirt while you find the solution on how to clean bike tires.

Rim Check

While cleaning the tire check if there are any cracks in the rim. If get any crack sign on the rim, get ready to change it as soon as possible.

Removing Tires

How to clean bike tires the important thing here is whether you clean the bike tire by removing or without removing it. For your convenience, you can remove the wheel and clean the tire.

When you install the wheel to the bike, be sure to tighten the nut bolt so that it does not detach from the bike. Don’t remove the wheel if you are not sure about the proper installation of it.

Hair Dryer Heat

If you use a hair dryer to dry the tire, you must keep in mind the heat of the dryer. Much heat can damage the tire’s durability. So, it is best not to use a hair dryer if you are not in a hurry to dry your tires.

Most Asked Questions

What is the best thing for cleaning bike tires?

There are many eco-friendly tire cleaners in the market which is bio-degradable and not harmful to the tire’s lifetime. You can also use a homemade cleaner.

How do I make my bike Tires look new?

You can use a tire polisher to make your bike’s tire look new. But, most of the time frequent use of tire polishers is responsible for cracks in the tire. So, don’t use it frequently.

What is the best homemade wheel cleaner?

In a word, dishwashing liquid or detergent powder. They contain less alkali which is suitable for tire cleaning and does not damage the tire.

What is the homemade cleaner-making procedure?

Take a bottle and pour 5 spoons of baking soda powder in it. Then take the cleaning vinegar solution and pour some of the vinegar into the bottle.

The baking soda powder is alkali, and the cleaning vinegar is an acid. So, they neutralize each other. In this case, the mixture will be not acidic or alkaline, which doesn’t decay your bike’s tire.

You can make homemade tire cleaner by mixing dishwashing liquid and detergent. Though it is slightly alkaline, it is suitable for the tires. Even if you are confused about making a homemade cleaner, you can get help from a professional or YouTube.

Conclusion

How to clean bike tires you need to make sure that your tire cleaner does not have any negative effects on your hands. Because non-neutralized cleaner causes decay of the tires.

After cleaning the tires, don’t put your bike in a shadow and cool place for a long time with the wet tires. Otherwise, the tires may be attacked and damaged by the fungus.